3
Press
s
or
r
to select
MAC Address
and press
OK
�
Network Connection Test
This function checks the Internet connectivity�
1
From the
Preferences
menu, select
Network
Setup
and press
OK
�
2
Press
s
or
r
to select
Network Connection Test
,
and press
OK
�
Note:
A message will appear to indicate if the
connection was successful or if it could not be
completed.
Note:
The result of Network Connection Test does not
always guarantee the connection. Depending on
the situation, YouTube may not be able to be used.
To cancel the Network Connection Test:
Press
BACK
while searching for the Internet connection�
Setting the Network Lock
• This feature is available when you set
Parental PIN
Setup
in the
DTV Settings
menu (
-
page 38)�
• You can use the
Network Lock
feature to prevent the
Web browser from launching�
1
From the
Preferences
menu, select
Network Lock
and press
v
or
w
to select
On
or
Off
�
2
Enter your four-digit PIN code�
Using the software keyboard
You can enter text by using the Software Keyboard. The
Software Keyboard window will appear when you press
OK
on a eld that accepts character input.
To enter text using the software keyboard:
1
Select the desired character on the on-screen software
keyboard�
2
Press
OK
�
3
Repeat steps 1 and 2 until you have entered all desired
text�
4
Press the
BLUE
button to close the software keyboard
and return to the previous screen�
Note:
If
BACK
is pressed, changes are not saved
and the software keyboard window is closed.
The text will remain as it was before starting the
keyboard.
Input operation on the remote control:
Button Description
OK
Inputs the selected character�
0-9 Inputs the number directly�
s
r
v
w
Moves the character select�
CC
cc
Moves the cursor�
Z
Moves the cursor to the head of a character string�
z
Moves the cursor to the end of a character string�
RED
Deletes 1 character to the left of the cursor�
GREEN
Cycles through upper case, lower case, numbers,
and symbols, if available�
YELLOW
Chooses an accented version of the current letter, if
applicable�
BLUE
Saves changes and closes the Software Keyboard
window�
BACK
Closes the Software Keyboard window without
saving changes�
Setting Network Device setup
External Control Setup
This setup allows you to operate a home network-
connected your TV and from external devices�
1
From the
Preferences
menu, press
s
or
r
to select
Network Device Setup
and press
OK
�
To Next Page
Loading...
