2
Press
s
or
r
to select
External Control Setup
and
press
OK
�
3
Press
s
or
r
to select an option and press
OK
�
The Software Keyboard window will appear�
User Name
- Input the User Name (to control the
TV from external devices etc�) by using the on-
screen software keyboard� The maximum number of
characters is 16�
Password
- Input the Password (to control the
TV from external devices etc�) by using the on-
screen software keyboard� The maximum number of
characters is 16�
Note:
Toshiba does not guarantee normal operation with
all connected devices.
Terminology:
DMS: DLNA CERTIFIED™ Server
DMR: DLNA CERTIFIED™ Renderer
DMC: DLNA CERTIFIED™ Controller
The TV can be congured as a DMR. When operating as
a DMR, the TV displays content provided by a DMS� The
selection of the media is done by the DMC - the TV does
not select the input�
The TV can play photo, movie, or audio les when
operating as a DMR�
Media Renderer Setup
Media Renderer
1
From the
Preferences
menu, press
s
or
r
to select
Network Device Setup
and press
OK
�
2
Press
s
or
r
to select
Media Renderer
Setup
and
press
OK
�
3
Press
s
or
r
to select
Media Renderer
and press
v
or
w
to select
On
or
Off
�
Media Controller Setup
You can limit which DMC can control this TV.
If Access Control is enabled, only those DMCs with a
check will be allowed to control the TV�
1
From the
Media Renderer Setup
menu, select
Media Controller Setup
, and press
OK
�
2
Press
s
or
r
to select
Access Control
and press
v
or
w
to select
On
�
3
Press
s
or
r
to select
Select Media Controller
,
and press
OK
�
4
Press
s
or
r
to select the item you want to accept,
and press
OK
� A check will appear in the box�
To remove the check, press
OK
again�
5
Press
w
to select
Done
, and then press
OK
�
Notes:
• You can select up to 8 DMC devices.
• If you would not like to limit the DMCs for this TV,
set
Access Control
to
Off
.
• Devices other than DMC may be displayed in the
list. Confirm the MAC address of DMC and set it.
Maximum Volume Setup
This feature allows you to set the maximum volume of the
TV when it receives volume operation commands from a
DMC�
1
From the
Media Renderer Setup
menu, press
s
or
r
to select
Maximum Volume Setup
, and press
v
or
w
to adjust to the desired volume�
Notes:
• The TV’s remote control can set volume regardless
of the value of
Maximum Volume Setup
.
• When DMR playback ends, the TV volume will
return to the value in effect when DMR playback
was started.
Device Name Setup
The TV’s device name as a DMR can change� The device
name can be conrmed from the DMC.
1
From the
Network Device Setup
menu, select
Device Name Setup
and press
OK
�
2
Select the
Device Name
eld and press
OK
� The
Software Keyboard window will appear�
3
Input the Device Name by using the Software
Keyboard (
-
page 54)� To save your setting, press
the
BLUE
button�
Note:
The Device Name can be up to 15 characters
long.
4
Select
Done
, and then press
OK
�
To Next Page
Loading...
