Toshiba 42XL700T - Using the TVs Features - Input Settings; Colour System Settings; External Input Skip Setup; Labeling Video Input Sources

29
Using the TV’s features
Setting the Colour System
1 Press
MENU
, and then press v or w to
display the SETUP menu�
SETUP
Menu Language
Auto Tuning
Manual Tuning
Colour System
Quick Setup
Software Licences
Location
Antenna
System Information
English
Auto
Home
2 Press s or r to select Colour System,
and then press v or w to select Auto, PAL,
SECAM, NTSC 4.43 or NTSC 3.58�
3 Press to store your settings�
Notes:
• Confirm that colour system is set to “Auto” . If
not, select “Auto” with s or r.
• This feature is available in Standard video
(composite) inputs mode.
Setting the external input skip
This feature is designed to make input selection
more convenient�
1 From the PREFERENCES menu, press s or
r until AV Connection is selected, and then
press �
Media Renderer Setup
Photo Frame Setup
Display Settings
AV Connection
Teletext
Network Setup
Teletext Language
Auto
4
Panel Lock Off
PREFERENCES
2 Press s or r to select Input Labeling, and
then press �
AV Connection
PC/HDMI 3 Audio
HDMI Settings
HDMI 3 Audio
Woofer
Digital Audio Output
Digital
Internal
PCM
PC
Input Labeling
3 Press s or r to select the input you want to
skip, and then press the RED button to turn
on the skip�
Input Label
--
--
--
--
--
--
--
--
--
Input Labeling
EXT 1
EXT 2
EXT 3
EXT 4
HDMI 1
HDMI 2
HDMI 3
HDMI 4
PC
4 To turn off the skip, press the RED button
again�
The input set to Skip is greyed out in the Input
Selection window and is skipped over when
you press on the remote control�
Labeling video input sources
These input labels are shown in the input
selector. You can label video inputs according to
the devices you have connected to the TV�
1 Select AV Connection from the
PREFERENCECES menu, and then
press �
2 Press s or r to select Input Labeling, and
then press �
Input Label
--
--
--
--
--
--
--
--
--
Input Labeling
EXT 1
EXT 2
EXT 3
EXT 4
HDMI 1
HDMI 2
HDMI 3
HDMI 4
PC
3 Press s or r to select the item you want
to label, and then press v or w to select
--, Amplifier, DVD, Game, PC, Recorder,
Satellite or VCR, or press the GREEN button
to select User Input�
Note:
When User Input is selected by pressing
the GREEN button, the Software Keyboard
window will appear. Input the desired characters
(10 characters or less) by using the Software
Keyboard (- page 42) or using the number
buttons for number input. To save your settings,
press the BLUE button.
4 Repeat step 3 for other video inputs�