Toshiba 48L5443DG - Settings Menu Operation, Conditional Access; Configuring Your Tvs Settings; Viewing Settings Menu; Using a Conditional Access Module

English - 32 -
English
Settings Menu Operation, Conditional Access
Conguring Your TV’s Settings
Detailed settings can be congured to suit your personal
preferences.
Viewing Settings Menu
Press MENU button and select Settings by using Left
or Right button. Press OK button to view Settings
menu.
Press Up or Down button to highlight a menu item.
Press OK button to select an item. Press MENU
button to exit.
Conditional Access: This setting controls conditional
access modules when available. Use Up or Down
button to highlight Conditional Access. Press OK
button to continue.
Language: Congures language settings.
Parental: Congures parental settings.
Timers: Sets timers for selected programmes.
Recording Conguration: Displays the recording
conguration menu.
Date/Time: You can congure date/time preferences
by using this menu screen.
Sources: Enables or disables selected source
options.
Network Settings: Congures network settings.
Satellite Settings: Congures satellite settings.
Other Settings: Displays other setting options of
the TV set.
Netix: Netix is a provider of on-demand internet
streaming media. Press Up or Down button to highlight
Netix. Press OK button to proceed. Deactivate option
is highlighted. Press OK button to deactivate Netix.
“Deactivate Completed” message appears on the
screen. Once you deactivate Netix, you have to sign
in to use Netix again.
Also use this option to view your ESN-number, which
is an unique ID number for Netix, created especially
to identify your TV. Enter this number if requested by
creating or using your Netix account.
Netix services are accessible via the Netix app on
the portal.
Using a Conditional Access Module
The Common Interface Slot, situated on the side of the
television, enables the insertion of a CAM (Conditional Access
Module) and card. These are purchased from a service
provider and allow additional subscription broadcasts to be
viewed. For more information, see a service provider.
IMPORTANT: Insert or remove the CAM only when the
TV is SWITCHED OFF.
• In order to watch certain digital channels, a conditional
access module (CAM) is necessary. This module must
be inserted in the CI slot of your TV.
• Obtain the Conditional Access Module (CAM) and
the viewing card by subscribing to a pay channel
company, then insert those to the TV using the following
procedure.
• Insert the CAM and then the viewing card to the slot that
is located in the terminal cover at the rear side of the TV.
• The CAM should be correctly inserted, it is impossible
to insert fully if reversed. The CAM or the TV terminal
may be damaged if the CAM is forcefully inserted.
Connect the TV to the mains supply, switch on and then
wait for few moments until the card is activated.
• When no module is inserted, “No common interface
module detected.” message appears on the screen.
• Refer to the module instruction manual for details of
the settings.
Viewing Conditional Access Menu (*)
(*) These menu settings may change depending on the
service provider.
Press MENU button and select Settings by using
Left or Right button. Press OK button to view
Settings menu. Use Up or Down button to highlight
Conditional Access and press OK to view menu
items.