User’s Manual 3-5
TOSHIBA AT100
Connecting to a Bluetooth device
Once paired, you can connect to a Bluetooth device. For example, to switch
devices or to reconnect after your TOSHIBA AT100 Tablet and this device
come back into range.
1. Open the Settings screen.
2. Tap Wireless & networks -> Bluetooth settings.
3. In the list of Bluetooth devices, tap a paired but unconnected device.
If the device you expected isn’t displayed, tap Scan for devices.
When your tablet and this device are connected, this device is shown
as connected in the list.
Disconnecting from a Bluetooth device
1. Tap the device in the Bluetooth settings screen.
2. Tap OK to confirm that you want to disconnect.
Unpairing a Bluetooth device
You can unpair a Bluetooth device to erase all pairing information related to
a specific device.
1. Tap and hold the device in the Bluetooth settings screen.
2. Tap Unpair or Disconnect & unpair in the menu that opens.
To Next Page
Loading...
