Toshiba AT305-T16 - Connecting to a Power Source

25
Getting Started
Connecting to a power source
❖ Micro HDMI
®
Out port—Allows for the transfer of video and
audio signals. For more information, see “Using external
devices” on page 87.
❖ SD™ Card slot—Supports the use of Secure Digital™ (SD™)
media. For more information, see “Using an SD™ Card” on
page 85.
Top
(Sample Illustration) Top view
Bottom
(Sample Illustration) Bottom view
❖ Speakers—Allow you to listen to sounds on your device. For
more information, see “Using the built-in speakers” on
page 84.
❖ Power/Docking connector—Allows connection to a USB
power cable or a docking station. Remove the docking
connector cover to access to the docking connector. For more
information, see “Using a docking station” on page 88.
Connecting to a power source
Your device requires power to operate. Use the USB Power cable
and USB/AC adaptor to connect the device to a live electrical
outlet, or to charge the device’s battery.
Always confirm that the power plug (and extension cable plug if
used) has been fully inserted into the socket, to ensure a secure
electrical connection. Failure to do so may result in a fire or electric
shock, possibly resulting in serious injury.
Be careful if you use a multiple connector. An overload on one socket
could cause a fire or electric shock, possibly resulting in serious
injury.
Internal microphone
Speaker
Power/Docking connector
Speaker