Toshiba B-EP Series - Page 159

CHAPTER 4 TRANSMISSION SEQUENCE
B-EP Series
4-49
(3) When interrupting communication while the Page Mode Command is running, and then
retransmitting data from the beginning,
1st transmission:
[GS]C
DATA001[LF]
DATA002[LF]
DATA003[LF] 1st label data (underway)
DATA004[LF]
DATA005[LF]



2nd transmission:
[GS]C
DATA001[LF]
DATA002[LF]
DATA003[LF] 1st label data (retransmission)
DATA004[LF]
DATA005[LF]
DATA006[LF]
[FF]
Print result: Data is printed but the printed output does not look correct (as shown below).
Transmits data from the
beginning.

Interrupts communication while
the command is running.
DATA001[LF]
DATA002[LF]
DATA003[LF]
DATA004[LF]
DATA005[LF]
DATA001[LF]
DATA002[LF]
DATA003[LF]
DATA004[LF]
DATA005[LF]
DATA006[LF]
1st transmitted data
2nd transmitted data