CHAPTER 6 LABEL MODE (INTERFACE COMMANDS)
B-EP Series
6-20
gg: Rotational angles of a character or character string
00: 0° (chara.) 0° (chara.-string)
01: 90° (chara.) 90° (chara.-string)
02: 180° (chara.) 180° (chara.-string)
03: 270° (chara.) 270° (chara.-string)
h: Selects black character or reverse character
B (Fixed value): Black character
ii: Data length
00 to 99 NOTE: When “00” is designated, the length is equivalent to the
data sent by the Data Print Command.
JIS 8 code: Data which is separated by [LF]
Packed BCD code: Data which is delimited by “F”
j: Data code
1: JIS 8 code (Fixed at 1 when the type of font is “C,” “Q” or “R.”)
2: Packed BCD code (only for IrDA: TEC Protocol)
k: Fixed data No.
0 (Fixed value)
Pl: Print position (Omissible. If omitted, the print position is left-aligned.)
0: Left
1: Center
2: Right
To Next Page
Loading...
