28
[Security]:
Set communication security.
When selecting “No Security,” security is disabled, regardless of bonding settings.
When selecting “Link Level,” security for bonding settings is enabled.
Options: No Security
Link Level
[Bonding] Group
This group can be set up only on Bluetooth mode printers.
It takes time to register a bonding list.
[Bonding List]:
BD addresses and PIN codes of devices to be registered on the printer’s bonding table are listed.
Bonding information is registered on the printer using a specified registration method.
Up to 10 information records can be registered.
By double-clicking bonding information, you can edit or delete the information.
Since PIN codes are security information, they are displayed as asterisks except when they are being
entered.
[Registration Method]:
Select a method to register the bonding list on the printer.
When “Overwrite” is selected, the printer’s bonding table is replaced with the bonding list information.
When no information is registered on the bonding list, you can initialize the printer’s bonding table.
When “Addition” is selected, the information in the bonding list is added to the printer’s current bonding
table.
When the number of bonding information records registered on the printer exceeds 10, the oldest
records are overwritten.
When the same BD address already exists, the bonding information having this address is overwritten.
When “************” is set, bonding information except for “************” becomes invalid.
Options: Overwrite
Addition
[BD Address]:
Enter a BD address of a device you want to add to the bonding list, using 12 characters from “0” to “F.”
Entering “************” allows no connection destination to be specified.
[PIN Code]:
Enter the PIN code assigned to the device having the entered BD address, using one to 16
alphanumeric characters.
[Add]:
This button is used to add bonding information entered in [BD Address] and [PIN Code] to the bonding
list.
When a BD address already exists in the list, the information is overwritten.
When “************” is added, all bonding information except for “************” is deleted.
When “************” exists in the bonding list, “************” is deleted.
When the list already contains 10 records of bonding information, no more registration can be done.
[Remove]:
This button is used to delete bonding information selected in the bonding list.
To Next Page
Loading...
