Toshiba B-EP Series - Option Tab

38
Feed Position -50.0 to +50.0 (mm) 0.0
X-coordinate -99.9 to +99.9 (mm) 0.0
Print Density -30 to +30 0
Adjust
Strip Position -2.0 to +3.0 (mm) 0.0
Reflective Sensor Threshold 0.0 to 4.0 (V) 1.0
Transmissive Sensor Threshold 0.0 to 4.0 (V) 1.4
Auto
Low
Sensor
Strip Sensor Sensitivity
High
Auto
Disable Basic Interpreter
Enable
Disable
Disable
Basic
Basic Trace
Enable
Disable
Disable Headcheck at power on
Enable
Disable
Disable Headcheck at cover close
Enable
Disable
Disable Printing with broken dots
Enable
Disable
Disable
Action
Feed at cover close
Enable
Disable
AUTO1 (High)
AUTO
Head output division
(Print speed)
3 Division (Low)
AUTO1 (High)
Disable B-SP2D mode
Enable
Disable
Disable Linerless label mode
Enable
Disable
AUTO
Batch
Mode
Issue mode
Strip
AUTO
Option Tab
Setup group Setup item Options or range Default
Disable System Mode Password
Enable
Disable
New Password 0000 to FFFF 0000
Password
Old Password 0000 to FFFF 0000
Disable Module Option Module
Enable
Disable
SHELL SHELL Disable Disable
Backlash Step 1 2-inch: 1
4-inch: 8
2-inch: 1
4-inch: 8
Setting
Backlash Step 2 2-inch: 1
4-inch: 8
2-inch: 1
4-inch: 8