Toshiba B-EP Series - Page 147

- 138 -
6.6.8 RAM Clear
6.6.8.1 RAM Clear Operation Example
Power OFF
(1) Power off state
(2) While holding down the [FEED] key, press the
[POWER] key to turn the power on.
[FEED] [POWER]
< 0 > S H U T D O W N
(3) System mode menu display (Shutdown)
[PAUSE]
(4) Press the [PAUSE] key.
< 1 > D I A G N O S T I C
(5) System mode menu display (Self-test)
[PAUSE] (6) Press the [PAUSE] key.
< 2 > M O D E S E T T I N G
(7) System mode menu display
(Mode setting)
[PAUSE] (8) Press the [PAUSE] key.
< 3 > P A R A M E T E R S E T
(9) System mode menu display
(Parameter setting)
[PAUSE]
(10) Press the [PAUSE] key.
< 4 > A D J U S T S E T
(11) System mode menu display
(Fine adjustment value setting)
[PAUSE] (12) Press the [PAUSE] key.
< 5 > T E S T P R I N T
(13) System mode menu display (Test print)
[PAUSE] (14) Press the [PAUSE] key.
< 6 > S E N S O R A D J U S T
(15) System mode menu display
(Sensor display/adjustment)
[PAUSE] (16) Press the [PAUSE] key.
< 7 > R A M C L E A R
(17) System mode menu display
(RAM clear)
[POWER] (18) Press the [POWER] key.
N O R A M C L E A R
(19) No RAM clear mode
(*) A mode to prevent RAM clear from being
performed mistakenly
[PAUSE] (20) Press the [PAUSE] key.
P A R A M E T E R C L E A R
(21) Parameter clear mode
[PAUSE] (22) Press the [PAUSE] key.
M A I N T E . C N T C L E A R
(23) Maintenance counter clear mode
[FEED] + [PAUSE] (24) While holding down the [FEED] key, press the
[PAUSE] key.