Toshiba B-EP Series - Page 150

- 141 -
Parameter Clear Operation Examples
RAM clear for Global (QM) model
P A R A M E T E R C L E A R (1) Parameter clear mode
[POWER] (2) Press the [POWER] key.
* * * Q M T Y P E * * * (3) RAM clear for the QM type
[POWER] (4) Press the [POWER] key.
* (5) Start of parameter clear
* *
* * * (6) Progress display
* * * * * * * * * * * * * * * *
* * * C O M P L E T E * * * (7) Completion of parameter clear
[POWER] (8) Press the [POWER] key.
(9) The power is turned off.
<Supplemental Explanations>
y When “COMPLETE” is displayed after RAM clear is completed, turn off the power. (The power
can be turned off only by using the [POWER] key.)
y The total label distance covered and sensor adjustment values (system mode <6>) are not cleared
by RAM clear.