- 156 -
6.6.9.2.2 USB Serial Number Setting
S E R I A L N U M B E R
USB serial number setting
[POWER]
Press the [POWER] key.
Setting of 1st digit *
Press the [PAUSE] or [FEED] key to set
the value.
[POWER]
Press the [POWER] key to determine the
value. (Moves to the next digit.)
Setting of 2nd digit *
Press the [PAUSE] or [FEED] key to set
the value.
[POWER]
Press the [POWER] key to determine the
value. (Moves to the next digit.)
Setting of 11th digit *
Press the [PAUSE] or [FEED] key to set
the value.
[POWER]
Press the [POWER] key to determine the
value. (Moves to the next digit.)
Setting of 12th digit *
[POWER]
Press the [POWER] key to determine the
value.
< 8 > I / F S E T T I N G
System mode menu display
(Interface setting)
* Characters that can be used for setting: Space, 0 to 9, A to Z
<Supplemental Explanations>
y When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE]
key is pressed.
y When the [FEED] and [PAUSE] keys are simultaneously pressed, the display returns to the system
mode menu.
y When the [FEED] key or [PAUSE] key is pressed for 0.5 seconds or more during this setting, repeat
mode is enabled and the key pressed is repeatedly entered.
y The change in the parameter setting becomes effective when the [POWER] key is pressed after
setting, then stored in the backup memory.
To Next Page
Loading...
