Toshiba B-EP Series - Self-Test Items

- 50 -
6.6.1.2 Self-test Items
(1) Printing of maintenance counter values and various parameter values
c Maintenance counter values
• Total label distance covered (cannot be cleared)
• Total label print distance covered (cannot be cleared)
• Label distance covered (1 to 5)
• Label print distance (1 to 5)
• RS-232C hardware error count
• System error count
d Various parameter values
[Value programmed on the PC]
• Feed amount fine adjustment value
• Print tone fine adjustment value
• Strip position fine adjustment value
[Value programmed using the keys]
• Feed amount fine adjustment value
• Print tone fine adjustment value
• Strip position fine adjustment value
• X-coordinate fine adjustment value
• Reflective sensor manual threshold fine adjustment value
• Transmissive sensor manual threshold fine adjustment value
• Print command language
• Printer ID
• Print type (BATCH/STRIP)
• Strip sensitivity
• Font zero
• Character code
• LCD language
• Control code
• EURO font code
• Automatic print head check for broken dots at power on
• MaxiCode specification
• Head division
• Print head check for broken dots after cover close
• Resume printing after broken dots error
• Feed to top of feed after cover close
• B-SP series compatibility mode
• Linerless
• Post-print stop position setting (* Supported on V1.0E or later.)
• Back feed restriction setting (* Supported on V1.0E or later.)
• Strip issue back feed setting (* Supported on V1.0E or later.)
• XML
• Beep volume
• Auto power-off timing
• Power save mode timing
• LCD backlight off timing
• Writable character storage area
• BASIC file storage area
• PC save area
• Form storage area
• Graphic storage area
• LABEL form version number
• BASIC interpreter