- 72 -
6.6.2.2.3 B-SP Series Compatibility Mode Setting (B-SP MODE)
This setting enables the use of software assets created during the development of the B-SP
series.
B - S P M O D E O F F
B-SP series compatibility mode is disabled.
[PAUSE]
B - S P M O D E O N
B-SP series compatibility mode is enabled.
[PAUSE]
Default value: OFF (B-SP series compatibility mode is disabled.)
<Supplemental Explanations>
y When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE]
key is pressed.
y When the [FEED] and [PAUSE] keys are simultaneously pressed, the display returns to the system
mode menu.
y When the [FEED] key or [PAUSE] key is pressed for 0.5 seconds or more during this parameter
setting, repeat mode is enabled and the key pressed is repeatedly entered.
y The change in the parameter setting becomes effective when the [POWER] key is pressed after
setting, then stored in the backup memory.
y This setting allows the use of software assets of the B-SP series as they are, but the area where
the mechanism is different cannot be used (no compatibility).
To Next Page
Loading...
