Toshiba B-EP Series - Various Parameter Settings; Parameter Setting Operation Example

- 79 -
6.6.3 Various Parameter Settings
6.6.3.1 Parameter Setting Operation Example
Power OFF
(1) Power off state
(2) While holding down the [FEED] key, press the
[POWER] key to turn the power on.
[FEED] [POWER]
< 0 > S H U T D O W N
(3) System mode menu display (Shutdown)
[PAUSE]
(4) Press the [PAUSE] key.
< 1 > D I A G N O S T I C
(5) System mode menu display (Self-test)
[PAUSE]
(6) Press the [PAUSE] key.
< 2 > M O D E S E T T I N G
(7) System mode menu display (Mode setting)
[PAUSE]
(8) Press the [PAUSE] key.
< 3 > P A R A M E T E R S E T
(9) System mode menu display
(Parameter setting)
[POWER]
(10) Press the [POWER] key.
L C D D E N S I T Y 0
(11) LCD density setting
[POWER]
(12) Press the [POWER] key.
F O N T C O D E P C - 8 5 0
(13) Character code setting
[POWER]
(14) Press the [POWER] key.
Z E R O F O N T 0
(15) Font zero setting
[POWER]
(16) Press the [POWER] key.
L C D E N G L I S H
(17) LCD language setting
[POWER]
(18) Press the [POWER] key.
C O D E A U T O
(19) Control code setting
[POWER]
(20) Press the [POWER] key.
E U R O C O D E B 0
(21) EURO font code setting
[POWER]
(22) Press the [POWER] key.
M A X I C O D E T Y P E 1
(23) MaxiCode specification setting
[POWER]
(24) Press the [POWER] key.