1. INTRODUCTION EO13-33005
1.2 Operation Panel
1- 4
Function of the LCD
(1) Radio intensity
Radio intensity mark:
Indicates a radio intensity level (when wireless LAN is enabled (LAN=ON) for
the wireless LAN model).
(2) Connection
Link mark:
Indicates a connection status with an access point for wireless LAN
models
(3) Sleep
Sleep mark:
Indicates a power save status.
(4) Transmission
Communication mark:
Indicates a data communication status.
(5) Error
Error mark:
Indicates a printer error status.
(1) (2) (3) (4)
(5) (6) (7)
(8)
ON: -80 dbm ≥ X > -90 dbm
OFF: No communication
ON: Sending
ON: Receiving
ON: Sending & receiving
OFF: Normal (not in power save mode)
ON: In power save mode
OFF: Not in error state
ON: In error state
ON: Not connected
OFF: Connected
Blink: Roaming
ON: -70 dbm < X
ON: Out of range
ON: X ≤ -90 dbm
ON: -70 dbm ≥ X > -80 dbm
Infrastracture
ON: Paused due to wrong setting
ON: X ≤ -90 dbm
dhoc
To Next Page
Loading...
