Toshiba B-EP4DL-GH32-QM-R - Page 409

CHAPTER 6 LABEL MODE (INTERFACE COMMANDS)
B-EP Series
6-28
(4) Rotational angles of a character and character string
(5) Print position
• Left (Default)
• Center
• Right
(6) Character string width and number of character string digits
Usually, one character size is determined by the character width and height.
When the character string width and number of character string digits are specified,
the character width will be automatically changed when printed. If the following
conditions are satisfied, however, these parameter settings become ineffective,
and the characters are printed in normal size.
• Conditions of ineffectiveness
(1) These parameters are omitted.
(2) The character string width is set to “0.”
(3) No. of print data ≥ No. of specified character string digits
Conditions that these parameters become effective are described on the following
pages.
Origin
Origin
Origin
270°
Origin
0° 90° 180°
Sample