Toshiba B-EP4DL-GH32-QM-R - Page 411

CHAPTER 6 LABEL MODE (INTERFACE COMMANDS)
B-EP Series
6-30
e When one field width < specified character string width
(Space between characters < 0, Specified character string digits = 8)
 Print image when the parameter setting is omitted.
Corrected space between characters=((Specified character string digits – data
length(x0.5+1) x Space between characters=-15 dots
A=Specified character string width – (1 character width x Data
length+(corrected space between characters x (Data length – 1))=200 dots – 95
dots = 105 dots
B=A/Data length=105 dots/4≈26 dots (rounded down)
One character width=1 character width+B=35 dots+26 dots=61 dots
 Print image when the parameter setting is specified.
* When the number of print data is 8 digits or more, the condition of
ineffectiveness (3) is satisfied. In this case, the characters are printed in
normal width.
1 field width
(
125 dots
)
A
A B C D
One character width (35 dots)
S
p
ace between characters
(
-5 dots
)
Specified character string width (200 dots)
A B C D
Specified character string width (199 dots)
One character width (61 dots)
Space between characters (-15 dots)