What to do if Toshiba B-EP800-CHG6-QM-R charging time is too long?
Charging time can vary based on battery condition and ambient temperature. However, if your Toshiba Battery Charger continues charging even after the specified time, stop charging and replace the battery pack.
How to fix a Toshiba B-EP800-CHG6-QM-R Battery Charger when the CHARGE lamp doesn't light?
If the CHARGE lamp on your Toshiba Battery Charger doesn't light up, it could be due to several reasons: * The power cord may not be properly connected. Ensure it's firmly connected to both the AC adapter and the AC outlet. * The terminals of the charger or battery electrodes might be stained. Clean them with a soft, dry cloth. * The battery pack might have over discharge protection activated. Leave the charger and battery pack alone for a few minutes. If the CHARGE lamp still doesn't light, the battery pack may be faulty, and you should stop using it. * The partition might not be fitted correctly. Make sure the partition is correctly oriented.
General| Input voltage | 100-240 V |
|---|---|
| Output current | 7.89 A |
| Output voltage | 19 V |
| Input frequency | 50/60 Hz |
| AC adapter included | Yes |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 10 - 85 % |
| Operating relative humidity (H-H) | 20 - 80 % |
| Compatible battery sizes | - |
| Number of batteries supported | 6 |
| Product color | Black |
| Type | Indoor battery charger |
Weight and Dimensions| Depth | 213 mm |
|---|---|
| Width | 148 mm |
| Height | 77 mm |
| Weight | 900 g |
To Next Page