Toshiba B-EV4 Series - Replacing the Print Head Assy; B-EV4 T Model

3. REPLACING THE IMPORTANT PARTS EO18-33025
(Revision Date: Mar. 27, 2009)
3.5 Replacing the Print Head Ass’y
3-10
3.5 Replacing the Print Head Ass’y
3.5.1 B-EV4T model
1. Refer to section 3.1 to open the top cover.
2. Open the ribbon access cover.
3. Remove the two screws which secure the print head ass’y.
Ribbon Access Cove
r
Screw
CAUTION!
1. NEVER touch the element when handling the Print Head.
2. NEVER touch the connector pins to avoid a breakdown of the Print Head by static
electricit
y
.
Print Head Ass’y
Screw