- 148 -
(4) The configuration of the writable character file stored in SD card is as follows.
1st byte No. of dots for left offset
2nd byte (from upper to lower)
3rd byte No. of dots for top offset
4th byte (from upper to lower)
5th byte No. of dots for character height
6th byte (from upper to lower)
7th byte No. of dots for character width
8th byte (from upper to lower)
9th byte No. of dots for horizontal spacing/proportional spacing
10th byte (from upper to lower)
11th byte
Writable character data (Hex. data)
(If it is stored in the nibble mode, data is 8 bits/byte.)
1-byte writable character W/C = Writable character
Memory 0100 01000020. UDF (W/C file for character code 20H)
(Writable character 01) 01000021. UDF (W/C file for character code 21H)
0101 Each W/C file 01000022. UDF (W/C file for character code 22H)
(Writable character 02)
0102 Each W/C file 010000FD. UDF (W/C file for character code FDH)
(Writable character 03) 010000FE. UDF (W/C file for character code FEH)
010000FF. UDF (W/C file for character code FFH)
0126 Each W/C file
(Writable character 39)
0127 Each W/C file
(Writable character 40)
2-byte writable character
0200 02002020. UDF (W/C file for character code 2020H)
(Writable character 51) 02002021. UDF (W/C file for character code 2021H)
0201 Each W/C file 02002022. UDF (W/C file for character code 2022H)
(Writable character 52)
0202 Each W/C file 0200FFFD. UDF (W/C file for character code FFFDH)
(Writable character 53) 0200FFFE. UDF (W/C file for character code FFFEH)
0203 Each W/C file 0200FFFF. UDF (W/C file for character code FFFFH)
(Writable character 54)
0204 Each W/C file
(Writable character 55)
To Next Page
Loading...
