Toshiba B-EV4 Series - Page 199

- 195 -
No.
LED Indication
Printer Status
Restoration by
[FEED] key while
error state
Acceptance of
Status Request
Reset
Green Red Orange
Yes/No Command
Yes/No
19

(a) A command has been fetched from
an odd address.
(b) Word data has been accessed from a
place other than the boundary of the
word data.
(c) Long word data has been accessed
from a place other than the boundary
of the long word data.
(d) An undefined command in a place
other than the delay slot has been
decoded.
(e) An undefined command in the delay
slot has been decoded.
(f) A command which rewrites the data
in the delay slot has been decoded.
No No
NOTE 1:
 : On
◎ :Slow-speed Blinking (Interval: 1.0sec)
 :Medium-speed Blinking (Interval: 0.5sec)
★ :Fast-speed Blinking (Interval: 0.2sec)
 : Off