Toshiba B-EX4 SERIES - Page 123

5. SYSTEM MODE EO18-33027
5.3 DIAG
5-27
B-EX700-RFID-U4-R
Version
LCD message
R00
JPN
B-EX700-RFID-U4-US-R
Version
LCD message
R00
KR2, CN2 (Use of CN2 is prohibited.)
B-EX700-RFID-U4-EU-R
Version
LCD message
R00
EU0
U4 module preinstall model (B-EX4T1/EX4T2-GS18/TS18-CN-R)
Version
LCD message
R00
CN2, KR2, (Use of KR2 is prohibited.)
Wireless LAN mount check
WLAN NG
OK: Mounted
NG: Not mounted or setting of wireless LAN disabled
Wireless LAN
MAC 00-11-22-33-44-55
Wireless LAN MAC address (Printed only when WLAN is mounted.)
NOTE: A wireless LAN MAC address may not be printed depending on the combination of the system
mode start-up method and the LAN setting, even if a wireless LAN board is installed.
System mode start-
up method
Wireless LAN
board
LAN setting
Wireless LAN MAC
address
The power is turned
on while the [MODE]
key is held down.
Installed Any setting (*1) Printed.
Not installed Any setting (*1) Not printed.
The [MODE] key is
pressed while the
printer is starting up
after a power on.
Installed.
OFF
Not printed.
ON (AUTO)
Printed.
ON (LAN)
Not printed.
ON (WLAN)
Printed
Not installed.
Any setting (*1)
Not printed.
*1: Any setting means OFF, ON (AUTO), ON (LAN), or ON (WLAN).
RTC mount check
RTC NG
OK: Mounted. Print date and time if mounted (YY-MM-DD hh:mm:ss)
NG: Not mounted
RTC