Toshiba B-EX4 SERIES - Pinch Roller Upper Assy (for the T3 Series)

9. MAJOR UNIT REPLACEMENT EO18-33027
(Revised on AUG. 2016)
9.10 PINCH ROLLER UPPER ASS’Y
9-24
9.10.2 Pinch Roller Upper Ass’y (For the T3 Series)
1) Open the top cover. (Refer to Section 3.1.)
2)
Remove the three SMW-3x6 screws to remove the pinch roller side plate and 2 rollers.
3) Remove the two SMW-4x8 screws to detach the pinch roller cover.
4) Open the print head block and remove the SMW-4x8 screw.
Pinch Roller Side Plate
SMW-3x6 Screw
SMW-4x8 Screw
Roller
Roller
SMW-4x8 Screw