5. SYSTEM MODE EO18-33027
5.3 SELF-DIAGNOSTIC TEST
5-18
EEPROM 256B
256B: The data of checking area can be read/write correctly.
Alphanumeric character is capacity of EEPROM.
NG: The data of checking area can not be read/write correctly.
Memory for backup
SDRAM
32MB
Capacity of SDRAM
Memory for system and drawing
Sensor check contents
The sensor value which is not mounted is unsettled.
SENSOR1 0 0 0 0 0 0 0 0
, 0 0 0 0 0 0 0 0
Thermal head open sensor
1: The head is closed.
(If the head is opened, it is not printed.)
Thermal head-up sensor
1: The head is lowered.
(If the head is lifted, it is not printed.)
Cutter home position sensor
0: Home position
1: Outside the home position
Rewinder overflow sensor
0: Normal
1: Overflow
Ribbon rewind motor sensor
0: Outside the slit
1: Inside the slit
Ribbon back tension motor sensor
0: Outside the slit
1: Inside the slit
Blank (Fixed to 0)
Strip sensor (Peel-off sensor)
0: Label is not present.
1: Label is present.
Blank (Fixed to 0)
To Next Page
Loading...
