Toshiba B-EX4 - Ribbon Save; RBN SAVE; Pre Peel-Off; PRE PEEL off; Back Feed; BACK SPEED

5. SYSTEM MODE EO18-33027
5.4 PARAMETER SETTING
5-26
5.4.1.6 Ribbon save / RBN SAVE
・ Tag / TAG Enable ribbon save function (Head open/close lever: Tag position)
・ Label / LABEL Enable ribbon save function (Head open/close lever: Label position)）
・ Disable / OFF Disable ribbon save function
(*1) If this setting is enabled when ribbon module is not mounted, ribbon may be slack and printer may
not print correctly. So, be careful for this setting.
Ribbon save function may not work correctly if lock position of actual head open/close lever is different
from this setting.
5.4.1.7 Pre peel-off / PRE PEEL OFF
・ Disable / OFF Disable pre peel off
・ Enable / ON Enable pre peel off
(*) Pre peel off is enabled regardless this setting if 10 ips is selected.
5.4.1.8 Back feed / BACK SPEED
・ Standard speed/ STD 3ips
・ Low speed / LOW 2ips