Toshiba B-EX4 - Boot Display of System Mode and User Mode When Password Is Enabled

5. SYSTEM MODE EO18-33027
5.4 PARAMETER SETTING
5-36
5.4.4.1 Boot display of system mode and user mode when password is enabled
Password input display is displayed when booting system mode and user mode if password is enabled.
Password input for system mode
English Procedure
Press [FEED] key and [RESTART] key at the same time when printer
turns on.
Display password input display.
Input password.
Open system mode.
When wrong password is inputted or pressing [CANCEL] key or [MODE] key
Display wrong password message.
Wrong password 3 times
Boot online mode.
Password input for user mode
・
password by @010 commands if user forgets password.
English Procedure
Hold down [RESTART] key or [MODE] key for 3 seconds when printer
is pausing after power on.
Display password input display.
Input password.
Open user mode.
When wrong password is inputted or pressing [CANCEL] key or [MODE] key
Display wrong password message.
Wrong password 3 times
Printer is locked. Turn on printer again.