Toshiba B-EX4 - Module; MODULE

5. SYSTEM MODE EO18-33027
5.11 RFID Module Setting
5-75
・ The data of the 3
rd
and 4
th
line is displayed by hex decimal.
The displayed data is below.
B-9704-RFID-H1-QM: Tag ID
B-SX704-RFID-U2: TAG ID
B-SX704-RFID-U2-R/EU-R/US-R/CN-R: EPC code of EPC area
・ If the reading data exceed 16 digits, only first 16 digits is displayed, If the reading data is less than 16
digits, space is displayed.
・ When multiple tags are read at the one time like short pitch tag reading, reading data of tag can be
changed by pressing [UP]/[DOWN] key.
5.11.2 Module / MODULE
The following information related module setting is displayed.
・ Module type / MODULE TYPE
・ Country / COUNTRY
・ Tag type / TAG
・ RF channel / RF CHANNEL
5.11.2.1 Module type / MODULE TYPE
・ NONE No ＲＦＩＤ module
・ H1 ＨＦ ＲＦＩＤ kitＢ−９７０４−ＲＦＩＤ−Ｈ１−ＱＭ
・ H2 ＨＦ ＲＦＩＤ kitＢ−ＳＸ７０４−ＲＦＩＤ−Ｈ２
・ U2 UHF RＦＩＤ kit B-SX704-RFID-U2-R  Japan
B-SX704-RFID-U2-EU-R Europe, India
B-SX704-RFID-U2-US-R North America, Australia,
Taiwan, Korea
B-SX704-RFID-U2-CN-R China
This module setting can be applicable after power off/on.