6. ON LINE MODE EO18-33027
6.1 THRESHOLD SETTING
6- 10
The icon types to indicate judgement in judgement result display of threshold setting are below.
No. Display example
（English）
Icon name Explanation
1
OK(Mid.)
・Available to detect by paper sensor. Threshold
value is middle.
2
OK (High)
・Available to detect by paper sensor. Threshold
value is around peak.
(The threshold should be adjusted around middle
to detect paper correctly in reflective
sensor/transmitive sensor fine adjust setting.)
3
OK (Low)
・Available to detect by paper sensor. Threshold
value is around base.
(The threshold should be adjusted around middle
to detect paper correctly in reflective
sensor/transmitive sensor fine adjust setting.)
4
NG （1） ・ Not available to detect paper gap by paper
sensor. Sensor adjustment is necessary.
5
NG （1） ・ Not available to detect paper gap by paper
sensor. Sensor adjustment is necessary.
(Threshold <= Base)
6
NG （2） ・Not available to detect by paper sensor.
(The paper gap can be detected by calibration but
is very difficult level.)
To Next Page
Loading...
