4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO18-33027
(Revision Date: Aug. 24, 2011)
4.3 PEEL-OFF MODULE (B-EX904-H-QM-R)
4-21
11. Align the screw holes in the Rewinder Ass’y with those in the printer main frame, and secure the
Rewinder Ass’y with the five ST-3x6 screws.
12. Re-attach the PSU in the reverse order of removal.
Rewinder Ass’y
ST-3x6 Screw
ST-3x6 Screw
ST-3x6 Screw
ST-3x6 Screw
PSU Harness
PSU
Main PC Board
To Next Page
Loading...
