4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO18-33027
(Revision Date: Aug. 24, 2011)
4.6 EXPANSION I/O INTERFACE BOARD (B-EX700-IO-QM-R)
4-38
6. Connect the Interface Cable to J3 on the Main PC Board.
7. Re-install the Side Panel (L).
8. Refer to Section 5.4.2.13 in the Maintenance Manual for selecting the operating mode.
9. Perform a loop back test to confirm the expansion I/O board functions properly.
J3
Main PC Board
Interface Cable
Expansion I/O Board
To Next Page
Loading...
