Toshiba B-EX4 - Page 81

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO18-33027
(Revision Date: Aug. 24, 2011)
4.11 HF RFID MODULE MOUNT KIT (B-EX700-RFID-H1-QM-R)
4-66
5. Secure the RFID module to the Module Attachment Plates with the three PT-3x6 screws.
6. Connect the Antenna Cable to the RFID Module until it clicks.
7.
Connect the Interface Cable of the RFID Module to J1 on the Main PC Board.
RFID Module
P
T
-3x6
P
T
-3x6
A
ntenna Cable
RFID Module
Connector
J1
RFID Module
Interface Cable
Main PC Board