Toshiba B-EX4 - Page 97

5. SYSTEM MODE EO18-33027
5.3 SELF-DIAGNOSTIC TEST
5-15
AGC THRESHOLD RFID AGC threshold setting
0 〜15
WRITE AGC AGC threshold for data write
0 〜15
RETRY MIN AGC AGC threshold lower limit for
retry
0 〜15
OFF Detection is disabled.
ON(ID) RFID error tag
detection for ID area
data
TAG CHECK RFID error tag detection
ON （ ACCESS
PASSWORD）
When PASS is selected,
the following settings are
subsequently displayed:
Password setting to
protect error tag
detection
ON: Enabled
OFF: Disabled
Automatic unlock
function setting
ON: Enabled
OFF: Disabled
ON Enable MULTI WRITE Hibiki tag multi-word write
OFF Disable
WRITE OK TAGS Count of RFID success label
write issue
0 〜 9999999
VOID PRINT TAGS Count of RFID failure label
write issue
0 〜 9999999
<< RTC >>
Item Content Print value
ON Enable BATTERY CHECK Battery check
OFF Disable
BATCH Each batch RENEWAL Time update timing
PAGE Each page