Toshiba B-EX4T1 Series - Enabling Z-Mode

2. PRINTER SETUP ENGLISH VERSION EO1-33089
2.6 Printer Setting
E2-25
2.6.4 Basic Program Setting
(Cont.)
2.6.5 Enabling Z-Mode
(3) TRACE
This parameter is to choose whether to enable tracing the BASIC
program.
• OFF Disables tracing the BASIC program.
• ON Enables tracing the BASIC program.
(4) EXPAND MODE
The printer switches the mode to execute the BASIC program.
The Z-Mode menu allows selecting whether or not to enable the Z-Mode
(Zebra converter)
.
(1) Z-MODE
• OFF Z-Mode is disabled.
• ON SETTING OFF Z-Mode is enabled. BASIC system mode
program is not started immediately.
• ON SETTING ON Z-Mode is enabled. BASIC system mode
program is started immediately.
USER SYSTEM MODE
<3>ADJUST SET
<4>LAN/WLAN
<5>BASIC
<6>Z-MODE