Toshiba B-EX6 Series - Page 101

5. SYSTEM MODE EO18-33031
5.4 DIAGNOSTIC
5-15
2400: 2400bps
4800: 4800bps
9600: 9600bps
19200: 19200bps
38400: 38400bps
115200: 115200bps
DATA LENGTH [ ]
[Description] Data length
[Values to be printed]
8: 8 bits
7: 7 bits
STOP BIT [ ]
[Description] Stop bit length
[Values to be printed]
1: 1 bit
2: 2 bits
PARITY [ ]
[Description] Parity
[Values to be printed]
NONE: None
EVEN: Even
ODD: Odd
CONTROL [ ]
[Description] Transmission control method
[Values to be printed]
XON+READY AUTO: XON/XOFF+ READY/BUSY(DTR) mode
(XON output when the power is on, XOFF output when the power is off)
XON/XOFF AUTO: XON/XOFF mode
(XON output when the power is on, XOFF output when the power is off)
READY/BUSY RTS: RTS mode
(No XON output when the power is on, no XOFF output when the power is off)
XON/XOFF: XON/XOFF mode
(No XON output when the power is on, no XOFF output when the power is off)
READY/BUSY: READY/BUSY(DTR)
(No XON output when the power is on, no XOFF output when the power is off)
<< CENTRO >>
ACK/BUSY [ ]
[Description] Centronics ACK/BUSY timing
[Values to be printed]
Rising edge: A rise of ACK signal and a release of BUSY occur at the same time.
Trailing edge: A fall of ACK signal and a release of BUSY occur at the same time.
INPUT PRIME [ ]
[Description] Reset process when the nInit signal is ON
[Values to be printed]
OFF: Reset is not performed.