Toshiba B-EX6 Series - Threshold Select; Reflect; Trans

5. SYSTEM MODE EM18-33031
5.7 SENSOR
5-52
5.7.3 THRESHOLD SELECT
・ REFLECT Threshold value for the reflective sensor is selected.
・ TRANS. Threshold value for the transmissive sensor is selected.
5.7.3.1 REFLECT
・ MANUAL THRESHOLD Threshold set in the manual threshold setting mode is used.
・ By COMMAND Threshold set by command is used.
5.7.3.2 TRANS.
・ MANUAL THRESHOLD Threshold set in the manual threshold setting mode is used.
・ By COMMAND Threshold set by command is used.