11. DISPLAY PATTERN AND KEY OPERATION FOR SYSTEM MODE AND USER SYSTEM MODE EM18-33031
11.1 LIST BOX WITH SCROLLBAR
11-1
11. DISPLAY PATTERN AND KEY OPERATION FOR
SYSTEM MODE AND USER SYSTEM MODE
11.1 LIST BOX WITH SCROLLBAR
The list box is used for displaying the menus or items to be selected. It is comprised of the following parts.
SYSTEM MODE C1.6
▲
<1>DIAGNOSTIC
<3>TEST PRINT
▼
<0>RESET
<2>SET PARAMETERS
The knob appears on the scrollbar when the number of scroll lines is over 4 lines.
There are three types of list box with scrollbar, as follows.
Display
Menu screen (without setting value)
SYSTEM MODE C1.6
▲
<1>DIAGNOSTIC
<3>TEST PRINT
▼
<0>RESET
<2>SET PARAMETERS
Menu screen (with setting value)
COUNTER
▲
TOTAL FEED 4.8km
FEED 0.0km
FEED1 4.8km
FEED2 0.0km
▼
Setting value selection screen
PRINT TYPE C1.6
▲
DIRECT THERMAL
▼
THERMAL TRANSFER
DISPLAY
Key function (Menu screen)
Key Substitute Key Function
[MODE] None Returns to the top menu without saving changes.
[CANCEL] [FEED] + [RESTART] Returns to the upper-level menu without saving changes.
[ENTER] [PAUSE] Displays a next screen.
[UP] [RESTART] Moves the cursor upward. When the cursor is positioned at the
top of the list, it scrolls from the top to the bottom.
[DOWN] [FEED] Moves the cursor downward. When the cursor is positioned at
the bottom of the list, it scrolls from the bottom to the top.
[LEFT] None No function
[RIGHT] None No function
Knob
Scrollbar
Title
Scroll line (up to 4 lines)