Toshiba B-EX6 Series - 15.4 Stepping Motor Assembly Replacement

15. MAJOR UNIT REPLACEMENT EM18-33031
(Revision Date: Nov., 2017)
15.4 STEPPING MOTOR ASS’Y
15-7
15.4 STEPPING MOTOR ASS’Y
1) Remove the side panel (L). (Refer to Section 3.2.)
2) Remove the SMW-3x6 screw to detach the USB connector.
3) Disconnect the stepping motor harness from the stepping motor ass’y.
4) Remove the two SMW-4x8 screws to detach the stepping motor ass’y.
SMW-4x8 Screw
Stepping Motor Harness
SMW-4x8 Screw
Stepping Motor Ass’y
SMW-3x6 Screw