Toshiba B-EX6 Series - Page 26

4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO18-33031
4.1 DISC CUTTER (B-EX206-QM-R)
4- 9
9. Place the hook at the left side of the Cutter Unit on the cut in the printer main frame.
10. Secure the right side of the Cutter Unit with the ST-3x6 screw.
11. Secure the bottom of the Cutter Unit with the two M-4x6 screws.
ST-3x6 Screw
Cutter Unit
Cut
Hook
M-4x6 Screw
Cutter Unit