4. INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO18-33031
(Revision Date: Mar. 1, 2017)
4.8 UHF RFID KIT (B-EX706-RFID-U4-US/EU/AU-R)
4-39
APPLICABLE MODEL
(1) This optional device is intended for the following models:
B-EX6T Series
Be careful not to install this product in any other models than above.
(2) The countries where the use of this device is allowed are as follows:
Model Name Frequency Band Applicable Countries
B-EX706-RFID-U4-US-R
UHF 902.75-927.25MHz
USA
UHF 920.9-923.3MHz Korea
UHF 920.625-924.375MHz China
B-EX706-RFID-U4-EU-R UHF 869.85MHz EU+EFTA
B-EX706-RFID-U4-AU-R UHF 918 – 926MHz AU
PACKING LIST
All the following parts are supplied with the kit. Make sure you have all items shown below.
If any part is missing, please contact your TOSHIBA TEC sales agent.
RFID Module
PT-3x6 screw （１pc）
Bush (1 pc)
Cable ties (2 pcs)
Installation Manual
(1 copy)
FCC ID Sticker (1 pc) for
U4-US-R only
Shield label
There are three types depending on the antenna
mounting position
F
C
R
RFID media guide
RFID module harness
FCC ID : BJIOH0007
IC ID : 1004C-MS0001
To Next Page
Loading...
