8. UPDATING FIRMWARE EO18-33030
8.1 Updating Firmware in B-FV Setting Tool (V1.0.27 or earlier)
8-10
10. When the data transmission is complete, your printer starts to update its firmware. During the
update LED 2 turns to red and orange alternatively, while LED 1 turns to solid green. In the
Download Firmware dialog box, the message shows that your printer is updating the firmware.
11. When the update is complete, the message “Done” appears. At the same time, your printer
restarts itself. Click Close to close the dialog box, or click Save Log to save the firmware update
log.
To Next Page
Loading...
