Toshiba B-FV4D-GL Series - 3.1 Housing and Cutter Cleaning; 3.1.4 Media Housing; 3.1.5 Cutter

3. MAINTENANCE ENGLISH VERSION EO1-33099
3.1 Cleaning
E3-3
3.1.4 Media Housing
3.1.5 Cutter
Wipe the media housing with a dry soft cloth. Wipe off dirt with a soft cloth
slightly moistened with mild detergent solution.
1. Turn the power off.
2. Wipe Cutter Outlet and Cutter Tray with a dry soft cloth.
3. Open the Top Cover.
4. Detach the Cutter Tray from the Cutter Block, then remove the Cutter
Block from the printer by lifting it.
NOTE:
Clean the cutter every one label
roll or at the end of day.
Cutter Outlet
Cutter Tray
Cutter Tray
Cutter Block