Toshiba B-SX5 Series - 7. DOWNLOAD MODE

- 128 -
(9) Max. number of RFID write retries
0 to 255
Set the maximum number of retries to write data onto the RFID tag.
The printer retries to write data onto the RFID tag for up to specified number of times. If the
time-out has come before the max. number of retries have been done, the printer stops the
retries at the time.
(10) RFID write retry time-out
0.0 to 9.9 (0.0 second to 9.9 second)
Set the time-out for retry to write data onto the RFID tag.
If the printer has retried for the max. number of times within the RFID write retry time-out, the
printer stops the retries at the time.
(11) RFID adjustment for retry
−99 mm to +99 mm
+: Reverse feed direction −: Feed direction
Set the value to move the RFID tag position.
If writing data on the tag failed, the printer feeds the RFID tag forward or backward for
specified length in order to retry writing data. When “0” is set for this parameter, this
function is not performed.
Only the value of −3 mm or less or +3 mm or more becomes effective.
FEED
RESTART
• +
• Initial value (5)
• −
FEED
RESTART
• +
• Initial value (2.0)
• −
FEED
RESTART
• +
• Initial value (+00)
• −