Toshiba B-SX5 Series - Fine Adjustment Value Setting; Fine Adjustment Value Setting Operation Example

- 17 -
5.8 FINE ADJUSTMENT VALUE SETTING
5.8.1 Fine Adjustment Value Setting Operation Example
O N L I N E
B - S X 4 T V 1 . 0 A
P A U S E
B - S X 4 T V 1 . 0 A
< 1 > R E S E T
< 2 > P A R A M E T E R S E T
< 3 > A D J U S T S E T
< 3 > A D J U S T S E T
F E E D A D J . + 1 0 . 0 m m
< 3 > A D J U S T S E T
C U T A D J . + 5 . 0 m m
< 3 > A D J U S T S E T
B A C K A D J . - 3 . 0 m m
< 3 > A D J U S T S E T
X A D J U S T + 5 0 . 0 m m
[PAUSE]
[PAUSE]
[PAUSE]
[PAUSE]
(13) Cut (strip) position fine adjustment:
Set the fine adjustment value using the
[FEED] and [RESTART] keys.
(11) Feed fine adjustment:
Set the fine adjustment value using the
[FEED] and [RESTART] keys.
(15) Back feed fine adjustment:
Set the fine adjustment value using the
[FEED] and [RESTART] keys.
[PAUSE]
[RESTART]
[FEED]
[FEED]
(16) Press the [PAUSE] key.
(12) Press the [PAUSE] key.
(14) Press the [PAUSE] key.
(10) Press the [PAUSE] key.
(7) System mode menu display
(Parameter setting)
(9) System mode menu display
(Fine adjustment value setting)
(6) Press the [FEED] key.
(5) The reset menu is displayed.
(4) Hold down the [RESTART] key for 3
seconds or more while the printer is in
a pause state.
(8) Press the [FEED] key.
(2) Press the [PAUSE] key.
(3) “PAUSE” is displayed.
(1) Idling
Power ON
[PAUSE]
(17) X-coordinate fine adjustment:
Set the fine adjustment value using the
[FEED] and [RESTART] keys.
(18) Press the [PAUSE] key.