Toshiba B-SX5 Series - Lan Enable;Disable Setting (Supported Only by V4.4)

- 28 -
5.12 LAN ENABLE/DISABLE SETTING (SUPPORTED ONLY BY V4.4)
5.12.1 Operation Example of LAN Enable/Disable Setting
Power ON
O N L I N E
(1) Idling or printing normally
B - S X 4 T V 4 . 4
[PAUSE]
(2) Press the [PAUSE] key.
P A U S E
(3) “PAUSE” is displayed.
B - S X 4 T V 4 . 4
[RESTART]
(4) Hold down the [RESTART] key for 3 seconds
or more while the printer is in a pause state.
< 1 > R E S E T
(5) The reset menu is displayed.
[RESTART]
(6) Press the [RESTART] key.
< 7 > L A N
(7) LAN enable/disable setting menu display
[PAUSE]
(8) Press the [PAUSE] key.
< 7 > L A N
O N S N M P O N
(9) The current setting is displayed.
[FEED] or [RESTART]
(10) Change the setting from LAN ON to OFF using
the [FEED] or [RESTART] key.
< 7 > L A N
O F F
(11) The new setting is displayed.
[FEED] or [RESTART]
(12) Change the setting from LAN OFF to ON using
the [FEED] or [RESTART] key.
< 7 > L A N
O N S N M P O N
(13) The new setting is displayed.
[FEED] or [RESTART]
(14) Change the setting from SNMP ON to OFF
using the [FEED] or [RESTART] key.
< 7 > L A N
O N S N M P O F F
(15) The new setting is displayed.
[PAUSE]
(16) Press the [PAUSE] key.
< 7 > L A N
(17) LAN enable/disable setting menu display