- 33 -
NOTE 3: {: ON
: Blinking
z: OFF
****: Remaining number of labels to be printed to 9999 (in units of 1 label/tag)
%%%%%%%: Remaining memory capacity for ATA card 0 to 9999999 (in units of 1 K byte)
###: Remaining memory capacity of PC save area of the flash memory card:
0 to 895 (in K bytes)
&&&&: Remaining memory capacity of writable character storage area for the flash memory card
0 to 3147 (in K bytes)
NOTE 4: If the ribbon near end detection setting is specified, the ERROR LED blinks slowly, while the
printer is in a ribbon near end state and displays messages 1, 2, or 3.
To Next Page
Loading...
