Toshiba B-SX5 Series - Self-Test; Self-Test Operation Example

- 39 -
6.2 SELF-TEST
6.2.1 Self-test Operation Example
(1) Maintenance counter/various parameters printout, automatic self-test printout
< 1 > D I A G . V 1 . 0 A
< 1 > D I A G . V 1 . 0 A
P R T T Y P E T R A N S F R
< 1 > D I A G . V 1 . 0 A
T Y P E [ S ] N O C U T
< 1 > D I A G . V 1 . 0 A
M A I N T E N A N C E C O N T
< 1 > D I A G . V 1 . 0 A
C H E C K I N G & P R I N T
< 1 > D I A G . V 1 . 0 A
< 1 > D I A G . V 1 . 0 A
P R T T Y P E T R A N S F R
< 1 > D I A G . V 1 . 0 A
T Y P E [ S ] N O C U T
< 1 > D I A G . V 1 . 0 A
A U T O D I A G N O S T I C
[FEED] [PAUSE]
[PAUSE]
(11) Start of maintenance counter/various
parameters check
(7) Issue type setting mode
(13) The self-test menu is displayed.
(4) Press the [PAUSE] key.
(5) Print type setting mode
(3) The self-test menu is displayed.
(2) While holding the [FEED] and [PAUSE]
keys down, turn the power on.
(1) Power off state
Power OFF
[PAUSE]
(12) Results printout
(6) Press the [PAUSE] key.
[PAUSE]
(8) Press the [PAUSE] key.
(9) Maintenance counter/various
parameter print mode
[PAUSE]
(15) Print type setting mode
(17) Issue type setting mode
(16) Press the [PAUSE] key.
[PAUSE]
(10) Press the [PAUSE] key.
[PAUSE]
(14) Press the [PAUSE] key.
[PAUSE]
(18) Press the [PAUSE] key.
(19) Automatic self-test mode
[PAUSE]
(20) Press the [PAUSE] key.