Toshiba B-SX5 Series - Issue Type Setting (TYPE); Print Type Setting (PRT TYPE)

- 40 -
< 1 > D I A G . V 1 . 0 A
C H E C K I N G & P R I N T
< 1 > D I A G . V 1 . 0 A
Print type setting (PRT TYPE)
• TRANSFR (Thermal transfer printing)
• DIRECT (Direct thermal printing)
Issue type setting (TYPE)
• [S]NO CUT (Batch issue)
• [C]WITH CUT (Issue with a cut)
NOTE: When an error occurs while printing the results of the self-test, the error message is
displayed and printing is stopped. The error is cleared by pressing the [PAUSE] key,
then the system mode menu is displayed again. Printing is not automatically resumed
after the error is cleared.
(21) Start of automatic self-test
(23) The self-test menu is displayed.
(22) Results printout
FEED
RESTART
FEED
RESTART