Toshiba B-SX5 Series - Fine Adjustment Value Setting

- 76 -
6.4 FINE ADJUSTMENT VALUE SETTING
6.4.1 Fine Adjustment Value Setting Operation Example
< 1 > D I A G . V 1 . 0 A
< 2 > P A R A M E T E R S E T
< 3 > A D J U S T S E T
< 3 > A D J U S T S E T
F E E D A D J . + 1 0 . 0 m m
< 3 > A D J U S T S E T
C U T A D J . + 5 . 0 m m
< 3 > A D J U S T S E T
B A C K A D J . - 3 . 0 m m
< 3 > A D J U S T S E T
X A D J U S T + 5 0 . 0 m m
< 3 > A D J U S T S E T
T O N E A D J . < T > + 3
[FEED] [PAUSE]
[FEED]
[PAUSE]
[PAUSE]
[PAUSE]
[PAUSE]
[PAUSE]
(11) Cut position (or strip position) fine
adjustment:
Set the fine adjustment value using the
[FEED] and [RESTART] keys.
(13) Back feed fine adjustment:
Set the fine adjustment value using the
[FEED] and [RESTART] keys.
(9) Feed fine adjustment:
Set the fine adjustment value using the
[FEED] and [RESTART] keys.
(15) X-coordinate fine adjustment:
Set the fine adjustment value using the
[FEED] and [RESTART] keys.
(4) Press the [FEED] key.
(5) System mode menu display
(Parameter setting)
(7) System mode menu display
(Fine adjustment value setting)
(3) The self-test menu is displayed.
(2) While holding the [FEED] and [PAUSE]
keys down, turn the power on.
(1) Power off state
Power OFF
(14) Press the [PAUSE] key.
(17) Print density fine adjustment
(Thermal transfer print mode):
Set the fine adjustment value using the
[FEED] and [RESTART] keys.
(8) Press the [PAUSE] key.
(10) Press the [PAUSE] key.
(12) Press the [PAUSE] key.
(16) Press the [PAUSE] key.
[FEED]
(6) Press the [FEED] key.
[PAUSE]
(18) Press the [PAUSE] key.